In this step-by-step guide, I will explain how to install LED tail lights on your F150. LED tail lights are a great upgrade for your vehicle as they enhance its appearance while also improving visibility and safety. By following these simple steps, you’ll be able to install LED tail lights on your F150 without any hassle. Let’s get started!
Upgrade your F150 with LED tail lights
![KEEKPO - For [Incandescent Upgrade] 2015-2020 Ford F150 [2018 Blind Spot Style] Full LED Tail Lights Brake Lamps Pair](https://m.media-amazon.com/images/I/61aHYYBJiYL._SS520_.jpg "How to install F150 LED tail lights? 4")
Gather the necessary tools and materials
Before starting the installation, gather all the necessary tools and materials to ensure a smooth process. Here is a list of items you will need:
- Screwdriver: Use a Phillips or flathead screwdriver, depending on your vehicle’s requirements. This will be used to remove any screws or fasteners securing the old tail lights.
- Wire strippers: These are essential for removing the outer insulation from the wires, allowing for proper connection. Make sure to choose wire strippers that are compatible with the gauge of your vehicle’s wiring.
- Electrical tape: Use electrical tape to secure and insulate the connections between your vehicle’s wiring and the new LED tail lights. This will help prevent any issues caused by loose or exposed wires.
- LED tail lights: Ensure you have the correct LED tail lights specifically designed for your F150 model. Check the packaging or the manufacturer’s instructions to verify the compatibility.
Once you have gathered all the necessary tools and materials, you can proceed with the installation confidently.
Prepare the vehicle
First and foremost, find a suitable location to park your F150, preferably on a flat surface. This will ensure stability and ease of access as you prepare the vehicle. Once you have found the perfect spot, go ahead and turn off the engine to prevent any accidents or mishaps while working. For instance, you might want to park your F150 in your garage or a parking lot – just make sure it is a secure and adequate space where you can comfortably carry out the necessary tasks.
Now that the vehicle is parked and the engine is off, take a moment to make sure everything is secure. This means checking that the parking brake is engaged, which will prevent the vehicle from rolling while you work. Additionally, before you begin any preparations, make sure you have enough room to comfortably move around the vehicle. For example, if you are working in a confined space, you may want to open the doors or clear any obstacles that could impede your movement. Remember, ensuring the vehicle is secure and providing enough workspace will set you up for a smooth and safe preparation process.
Remove the old tail lights
To remove the old tail lights, we will first need to use a screwdriver. Carefully locate the screws or bolts that are holding the old lights in place. Once you have identified them, use the screwdriver to loosen and remove them. Make sure to take your time and be gentle to avoid any damage.
Next, it’s time to disconnect the wiring harness. This step is crucial to ensure a smooth removal process. Begin by locating the connection point where the wiring harness meets the old tail lights. It is usually a plug or socket that holds the wires together.
To disconnect the wiring harness, gently pull the plug or socket apart. Be careful not to pull too hard or damage the wires. Once the wiring harness is disconnected, you can carefully set aside the old lights. Make sure to keep them in a safe place, preferably wrapped in a cloth or bubble wrap, to prevent any further damage.
Remember, always take your time when removing the old tail lights. Using a screwdriver, carefully remove the screws or bolts, and gently disconnect the wiring harness. By following these instructions, you will be one step closer to replacing your old tail lights with new ones. Good luck!
Install the new LED tail lights
Take the new LED tail lights and locate the wiring harness. It should be attached to the back of the lights.
Connect the wiring harness to the corresponding connectors in your F150. Match the connectors based on their shape and size. For example, if you see a round connector on the wiring harness, find the round socket in your truck and plug it in securely. Make sure the connections are properly aligned by ensuring that they fit snugly together without any gaps.
Once the connections are secure, carefully position the new lights in place. Line them up with the existing holes or slots on your F150. If you encounter any difficulty in aligning the lights, you may need to adjust the position of the wiring harness slightly.
Next, secure the lights in place using the screws or bolts provided. Insert the screws or bolts through the holes in the new lights and screw them tightly into the corresponding holes or slots in your truck. Make sure they are tightened securely to prevent any movement or vibration.
Congratulations! You have successfully installed the new LED tail lights on your F150. Enjoy the enhanced visibility and stylish look they bring to your vehicle.
Test the lights and finalize the installation
Before finishing up, double-check all the connections and make sure everything is properly installed:
- Inspect the wiring connections between the LED tail lights and the F150’s electrical system. Ensure that the wires are securely connected and there are no loose or exposed ends.
- Verify that the LED tail lights are properly aligned and securely attached to the vehicle. Check that all fasteners and screws are tightened and in place.
- Look for any signs of damage or wear on the tail lights or the wiring. Replace any components that appear to be defective or compromised.
- Test the function of the LED tail lights before finalizing the installation. Turn on your F150’s lights and observe if the LED tail lights illuminate as intended. Check all the lighting modes, such as the brake lights, turn signals, and reverse lights, to ensure they are working correctly.
If the LED tail lights are functioning correctly, follow these steps:
- Carefully tuck away any loose wires or excess wiring to prevent them from interfering with the operation of the tail lights or posing any safety hazards.
- Secure the wires with electrical tape to keep them neatly organized and protected from potential damage caused by rubbing against other components.
- Finally, close the tailgate to provide a clean and finished appearance to your newly installed LED tail lights. Step back and take a moment to admire the enhanced aesthetics and improved visibility they bring to your F150.
Remember, if you encounter any issues or are unsure about any part of the installation process, consult the vehicle’s manual or seek assistance from a professional mechanic.
The Final Steps
In conclusion, installing LED tail lights on your F150 is a straightforward process that can be accomplished by following these simple steps. Once you have installed these lights, you’ll be able to enjoy both the enhanced style and improved visibility that they provide. So go ahead and give your F150 a stylish upgrade today!
Essential Equipment
Easy Upgrade Essentials
Step-by-step guide to installing and utilizing your F150 LED tail lights
- Start by carefully unpacking the LED tail lights kit and familiarizing yourself with all the components included
- Locate the existing tail lights on your Ford F150 and identify the screws or fasteners that hold them in place. Use the appropriate tools, such as a screwdriver or wrench, to remove the old tail lights
- Take the new LED tail lights and match them with the corresponding socket or connector on your truck. Make sure they are aligned correctly before securing them in place
- Once the new tail lights are in position, use the screws or fasteners provided with the kit to secure them tightly. Ensure that they are properly fastened to prevent any loose connections
- Finally, test the functionality of the new LED tail lights by turning on your vehicle’s headlights and signaling the left and right turn signals. If everything is working correctly, you’re good to go!
- Please note that these steps may vary slightly depending on the specific model and brand of LED tail lights you have. Always refer to the manufacturer’s instructions for detailed guidance
Get all the answers to your questions about F150 LED tail lights
Are there any additional accessories or components I should consider when installing LED tail lights on my F150?
Certainly! When installing LED tail lights on your F150, there are a few additional accessories or components you may want to consider.
- Load resistors: LED tail lights have a lower power draw compared to traditional incandescent bulbs, which can cause hyperflashing or error messages on your vehicle’s dashboard. Installing load resistors helps to stabilize the electrical system and prevent these issues.
- Wiring harness: Depending on the specific LED tail lights you choose, you may need a wiring harness to properly connect them to your F150’s electrical system. This ensures a secure and compatible installation.
- Gasket or sealant: To prevent moisture from entering the tail lights and protect your investment from the elements, using a gasket or sealant around the edges can be beneficial. This will help maintain a watertight seal and increase the longevity of your LED tail lights.
- Mounting brackets: Some LED tail lights may require additional mounting brackets or adapters to properly secure them onto your F150’s body. These brackets ensure a secure fit and maintain the proper alignment of the lights.
I hope this information helps you with your LED tail light installation on your F150! Let me know if you have any other questions.